Indesit · Dishwasher · Error code
E1835 – Generic dishwasher fault E1835
Indesit dishwasher is reporting error E1835, indicating a general fault related to operation or sensors.
Smart summary for E1835
This quick AI-style overview sums up how serious this error is, how hard it usually is to fix yourself and roughly how long it takes.
What E1835 means
Error E1835 on many Indesit dishwasher models is used as a generic fault code. It usually points to a problem detected by the control board, such as a sensor reading outside the expected range or a cycle that could not complete.
Common causes
- Temporary software glitch or power fluctuation
- Blocked filter, hose or internal passage
- Sensor or wiring connection not making good contact
Quick checks you can do yourself
- Turn the appliance off at the mains and leave it powered down for a few minutes.
- Check and clean accessible filters, drains and hoses for blockages.
- Inspect the door or lid area for obstructions preventing a good seal.
- Restart a short cycle and monitor the appliance to see if the error returns.
Always unplug the appliance and switch off power at the mains before removing panels or working near wiring or water connections.
When to call a professional
If error E1835 reappears after simple checks and a power reset, there could be an internal electronics or sensor fault. At that point it is safer to have a qualified engineer test the appliance rather than replacing control boards or wiring blindly.
Recommended next steps
If the appliance continues to work normally after a reset and cleaning, keep an eye on it for a few days. If the same error appears frequently or is accompanied by unusual noises or smells, stop using the appliance and arrange a professional inspection.
Typical repair cost
£0–£160. Many dishwasher faults are simple blockages or filter/hosing issues you can fix for free. If a pump or inlet valve is required, parts and fitting often land in the £90–£160 range.
How to prevent this error in future
- Rinse or scrape heavy food off plates to reduce filter and sump blockages.
- Clean the filter and spray arms regularly and run a hot maintenance cycle monthly.
- Avoid kinking the drain hose when pushing the machine back in.
- Use dishwasher salt and rinse aid where required to prevent build-up.
Recommended parts & cleaners
The link below searches for compatible parts, hoses and cleaners that may help resolve E1835 issues on your Indesit dishwasher. Always check compatibility with your exact model before ordering.
View related parts on Amazon Open Amazon search →FAQs for E1835
What does E1835 mean on a Indesit dishwasher?
Error E1835 on many Indesit dishwasher models is used as a generic fault code. It usually points to a problem detected by the control board, such as a sensor reading outside the expected range or a cycle that could not complete.
Can I keep using the dishwasher with error E1835?
Usually you can do basic checks safely, but if you notice leaks, burning smells, unusual noises, or tripped electrics, stop and investigate before continuing.
How do I reset a Indesit dishwasher after this error?
A safe first reset is to power the appliance off at the socket (or isolator) for 60 seconds, then turn it back on. If the error returns immediately, focus on the causes listed above rather than repeated resets.
What is the most common fix for E1835?
Most commonly: Temporary software glitch or power fluctuation. Start with the first DIY checks and work down the list.
About this guide
This guide was created by the CodeSolveAI Appliance Help Team. We use manufacturer information, typical engineer reports and safe DIY practice to keep these pages up to date and practical.
Last reviewed: March 2026.
Was this page helpful?
Your feedback helps us improve these guides and keep them as practical as possible.