Hotpoint · Washing machine · Error code
F08 – Heater or heating relay fault
The control system has detected a problem with the heating circuit.
Smart summary for F08
This quick AI-style overview sums up how serious this error is, how hard it usually is to fix yourself and roughly how long it takes.
What F08 means
F08 usually indicates an issue in the heating circuit, such as a faulty heater, relay or wiring.
Common causes
- Failed heating element
- Loose or damaged wiring to the heater
- Control board relay fault
Quick checks you can do yourself
- Power the machine off and unplug it.
- Try running a cold‑only cycle to see if the washer completes without error.
- Avoid opening panels or accessing internal wiring unless you are qualified to do so.
Always unplug the appliance and switch off power at the mains before removing panels or working near wiring or water connections.
When to call a professional
Heating circuit faults involve high voltages and should normally be diagnosed and repaired by a trained appliance engineer.
Recommended next steps
If you repeatedly see F08, stop using high‑temperature programmes until the heater system has been inspected.
Recommended parts & cleaners
The link below searches for compatible parts, hoses and cleaners that may help resolve F08 issues on your Hotpoint washing machine. Always check compatibility with your exact model before ordering.
View related parts on Amazon Open Amazon search →Was this page helpful?
Your feedback helps us improve these guides and keep them as practical as possible.